Elation Elar Quad Par User Manual page 26

Editing The Channels Of The Individual Scenes
With this function you can edit the program to be called up in the Program Run.
1. Select "SC01" by pressing [UP] or [DOWN] button.
2. Press [ENTER], display shows "SCXX", "X" stands for scene number to be edited.
3. Select the desired channel number to edit by pressing [UP] or [DOWN] button.
4. Adjust the desired DMX value by pressing [UP] or [DOWN] button.
5. Press [ENTER] in order to edit other channels of this scene.
6. Repeat steps 3-5 until you finish setting all the DMX values for all channels of this scene.
7. Once all the channels are completed, the display will flash "TIME"
8. Press [ENTER] to edit the time needed, the display shows "TXXX", "XXX" stands for
the time needed to run the current scene, value "001-999". E.g., "002" means you need
0.4ms (002*0.2ms) to run the current scene. Adjust the desired time by pressing [UP] or
[DOWN] button.
9. Press [ENTER] to save the settings for the scene you are editing, the display will change
to the next scene automatically.
10. Repeat step 3-8 to edit other scenes, you can edit and save a maximum of 48 scenes.
11. Press [MENU] to exit. The number of steps can be defined under "STEP" and the
scenes can be called up under "RUN".
Editing Via The External Controller
Call up the first scene in your controller now.
1. Press [ENTER], the display to be edited.
2. Select "SC01" by pressing [UP] or [DOWN] button.
3. Select the desired channel number, press [UP] or [DOWN] button.
4. Press [ENTER], the display shows "C-01".
5. Press [UP] or [DOWN] button and the display shows " FADE ".（Adjust fade speed）
6. Press [ENTER] to adjust fade speed.
7. Select "CEDT" by pressing [UP] or [DOWN] button.
8. Press [ENTER], and the display shows "OFF".
9. Press [UP] or [DOWN] button and the display shows "ON".
10. Press [ENTER], the display shows "SC02", you successfully downloaded the first scene.
11. Adjust the Step-time as described above under point 12.
12. Call up the second scene in your controller now.
13. Repeat steps 5-11 until all desired scenes are downloaded.
14. Press [MENU] to exit. The number of steps can be defined under "STEP" and the
scenes can be called up under "RUN".
26
w w w . e l a t i o n l i g h t i n g . c o m
ELAR Q UAD P AR
U ser M anual 2 .0
™