Elation Elar Quad Par User Manual page 23

Main Menu
1. Press [MENU] to enter the main menu (display flashing).
2. Press [UP] or [DOWN] to select "SET".
DMX Channel Mode
With this function you can choose DMX channel Mode
1. Select "CHAN" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows "4CH"，"5CH"，"6CH"，"8CH"，or "36CH".
3. Press [UP] or [DOWN] button to select desired mode, the default is "4CH".
4. Press [ENTER] to confirm or press [MENU] to return to the main menu.
Automatic Run By No DMX
With this function you can automatically run the device with no DMX.
1. Select "FAIL" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows "OFF", "HOLD" or "AUTO".
3. Press [UP] or [DOWN] to select "OFF", "HOLD" or "AUTO", the default is "HOLD".
4. Press [ENTER] to confirm or press [MENU] to return to the main menu.
Restore Factory Settings
With this function you can restore the factory settings of the device. All settings will be set
back to the default values (shaded). Any edited scenes will be lost.
1. Select "DFSE" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows "ON" or "OFF".
3. Press [UP] to select "ON" to enable this function or press [DOWN] to select "OFF"
4. Press [ENTER] to confirm or press [MENU] to return to the main menu.
Power On To Preserve The MANL Settings
With this function enabled, the fixture returns to the set manual scene after re-power on.
1. Press the [UP] button until "POHO" is displayed and press [ENTER] button.
2. Press the [UP] to select "ON" to enable this function, or press [DOWN] to select "OFF"
to deactivate this function.
3. Press [ENTER] to confirm or press [MENU] to return to the main menu.
23
w w w . e l a t i o n l i g h t i n g . c o m
ELAR Q UAD P AR
U ser M anual 2 .0
™