Elation ELAR ELAR IPX Specifications

Elation professional work light specification sheet

Download this manual

Photometric:

LAMP REPLACEMENT:

Remove the two phillips

screws from the front lens,

and then slowly remove the

lens. Unscrew the lamp and

replace with the exact same

lamp.

ELAR IPX

SCREWS

Elation® Architectural - www.elationlighting.com

ELAR IPX SPECIFICATIONS:

Lamp:

Working Position: Any safe working position

Power Input Voltage:

Power Consumption:

Weight:

Dimensions: 11.1" (L) x 3.74" (W) x 6.49" (H)

Warranty:

32W HID

"Auto Sensing"

100~240V AC 50/60Hz

32W

2.6lbs./ 1.2Kgs.

284 x 95 x 165mm

2 Year (730 days)

Page 1 Photometric: LAMP REPLACEMENT: Remove the two phillips screws from the front lens, and then slowly remove the lens. Unscrew the lamp and replace with the exact same lamp. ELAR IPX SCREWS Elation® Architectural - www.elationlighting.com ELAR IPX SPECIFICATIONS: Lamp: Working Position: Any safe working position Power Input Voltage: 100~240V AC 50/60Hz Power Consumption:...
Page 2 Caution! No user serviceable parts inside do not attempt repairs. In the event your Elation Architectural fixture should fail, contact Elation Customer Support: Elation question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.Elation®lighting.com for any comments or suggestions.

Elar ipx