Installing The Base Station; Connecting The Base Station; Mode - Gigaset C460 IP Manual

First steps
Setting the date and time
¢ ¢
Settings Date/Time
§Menu§
~
Enter the day, month and year
with 6 digits and press
Use q to move between the
fields.
~
Enter hours and minutes with
4 digits (e.g. 0 7 1 5 for 07.15
hrs) and press
move between the fields.
The date and time are shown in the hand-
set's idle display page 1.
Registering the handset to the base
station
Your handset is registered to the base sta-
tion by default.
Instructions on how to register further
handsets to the base station are given on
page 32.
3
Figure 1 Connecting the phone to the fixed network and the Internet
1 Internet connection:
Router with integrated modem or
router and modem or
switch and modem
2 Gigaset C460 IP base station
3 Gigaset C46 handset
4 PC in LAN
8
.
§OK§
. Use q to
§OK§
4
LAN
1
2

Installing the base station

The base station is designed for use in
closed, dry rooms with a temperature
range of +5 °C to +45 °C.
¤
Set up the base station at a central
point in the apartment or house.
Please note:
u
Never expose the telephone to heat
sources, direct sunlight, other electrical
appliances.
u
Protect your Gigaset from moisture,
dust, corrosive liquids and vapours.

Connecting the base station

In order to be able to make calls with your
phone via the fixed network and via VoIP,
you must connect the base station to
the fixed network and the Internet, see
Figure 1.
Internet
1
Fixed network
Follow the steps in the order given below:
1. Connect the base station with the
phone connection
2. Connect the base station with the
mains power supply
3. Connect the base station with the
router