Installing The Base Station - Gigaset C450 IP User Manual

Please note:
u
Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and insert
them in again.
u
The batteries may warm up as they are
charging. This is not dangerous.
u
After a while the charge capacity of the
batteries will decrease for technical rea-
sons.
Setting the date and time
¢ ¢
Settings Date/Time
§Menu§
~
Enter the day, month and year
with 6 digits and press
q to move between the fields.
~
Enter hours and minutes with
4 digits (e.g. 0 7 1 5 for 07.15
hrs) and press
move between the fields.
The date and time are shown in the hand-
set's idle display (page 1).
Registering the handset to the base
station
Your handset is registered to the base sta-
tion by default.
For how to register other handsets to the
base station and make internal calls free of
charge, please see the full user guide
(page 5).
. Use
§OK§
. Use q to
§OK§

Installing the base station

The base station is designed for use in
closed, dry rooms with a temperature
range of +5 °C to +45 °C.
¤
Install/hang your base station at a cen-
tral point in the house.
Mounting the base station on a wall
Please note:
u
Never expose the telephone to heat
sources, direct sunlight or other electri-
cal appliances.
u
Protect your Gigaset from moisture,
dust, corrosive liquids and vapours.
First Steps
7