First Steps; Pack Contents; Setting Up The Handset For Use - Gigaset C460 IP Manual

First steps

First steps

Pack contents

The pack contains:
u
one Gigaset C460 IP base station
u
one Gigaset C46 handset
u
one mains adapter for the base station
u
one charging cradle incl. mains adapter
u
one phone cord
u
one Ethernet cable (LAN cable)
u
two batteries
u
one battery cover
u
one belt clip
u
one quick guide

Setting up the handset for use

The display is protected with
a plastic film. Please
remove the protective
film!
Inserting the batteries
Please note:
Use only the rechargeable batteries recom-
mended by Siemens Home and Office
Communication Devices GmbH & Co. KG on
page 58! This means: on no account may
conventional (non-rechargeable) batteries or
other battery types be used, otherwise serious
damage to health and property cannot be
ruled out, e.g. the outer casing of the batteries
could be destroyed or the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
¤
Fit the batteries with the correct polar-
ity (see diagram).
6
The polarity is indicated in/on the battery
compartment.
Closing the battery cover
¤
First align the notches on the side of
the battery cover with the lugs on the
inside of the casing.
¤
Then press the cover so that it clicks
into place.
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at the same
height as the display.