Changing A Handset's Internal; Number; Changing The Name Of A Handset; Locating A Handset ("Paging") - Gigaset C460 IP Manual

Changing a handset's internal

number

A handset is automatically assigned the
lowest available number on registration.
In the list of internal subscribers, the
handset is sorted according to its internal
number.
You can change the internal number of all
registered handsets (1–6). Numbers 1–6
can only be assigned once each.
Press the display key.
§INT§
Press the display key.
§Menu§
Edit Handset Number
Select and press
q
Select handset.
~
Enter number (1–6).
Press the display key to com-
§OK§
plete the operation.
You will hear the error tone if an internal
number has been allocated twice.
¤
Repeat the procedure with a free
number.

Changing the name of a handset

The names "INT 1", "INT 2" etc. are
assigned at registration. You can change
these names. The changed name is dis-
played in every handset's list.
Press the display key.
§INT§
q
Select handset.
Press the display key.
§Menu§
Change Handset Name
Select and press
~
Enter name (max. 10 charac-
ters) and press
.
§OK§
.
§OK§
.
§OK§

Locating a handset ("Paging")

You can locate your handset using the
base station.
¤
Press the registration/paging key on
the base station (page 1) briefly.
¤
All handsets will ring at the same time
("paging"), even if the ringtones are
switched off.
Ending paging
÷ / c
Briefly press the registration/
paging key on the base station
(page 1) or press the talk key
on the handset.

Making internal calls

Internal calls to other handsets registered
on the same base station are free.
Calling a specific handset
Press the display key.
§INT§
q c
Select handset and press the
talk key.
Or:
~
Enter the number of the hand-
set.
Calling all handsets ("group call")
Press the display key.
§INT§
P
Press the star key.
Or:
c Select and press the talk key.
Call All
Ending a call
a
Press the end call key.
Using several handsets
33