Changing Battery - Brinkmann ENDURA Owner's Manual

INSTR-SLRMAX/Sierra 2/20/02

Changing Battery

Step 1
Remove lens from top housing by turning
lens counter-clockwise.
Step 2
With top housing upside down (solar panel
facing down), remove diffractor lens by
turning counter-clockwise.
Step 3
Push tab on battery compartment lid and
remove the lid.
Step 4
Remove battery. Replace with new Ni-Cd
rechargeable battery.
Step 5
Replace battery compartment lid.
Step 6
Replace diffractor lens by turning
clockwise.
Step 7
Attach the lens by aligning the slots with
the grooves in top housing. Turn clockwise
to lock in place.
NOTE: These lights utilize L.E.D. (Light
Emitting Diode) technology. There are
no bulbs to replace.
It is important that the solar panel is kept free of dirt
and debris. A dirty solar panel will not allow the
battery to fully charge. This will shorten the life of
the battery and cause the light to malfunction. Clean
regularly with a dampened cloth or paper towel.
5
3:23 PM Page 6
United States or Canada. The RBRC
alternative to placing used Ni-Cd batteries into the trash or the
municipal waste stream, which may be illegal in your area. Please
call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling
and disposal bans/restrictions in your area. The Brinkmann
Corporation's involvement in this program is part of our commitment
to preserving our environment and conserving our natural resources.
Lens
Diffractor Lens
Battery
Cleaning
Top Housing
IMPORTANT: The EPA Certified RBRC
Recycling Seal on the nickel-cadmium (Ni-Cd)
battery contained in our product indicates The
Brinkmann Corporation is voluntarily
participating in an industry program to collect
and recycle these batteries at the end of their
useful life, when taken out of service in the
® program provides a convenient
Battery
Compartment Lid
® Battery