INSTR-SLRMAX/Sierra
2/20/02
2
3
3:23 PM
Page 7
ASSEMBLY INSTRUCTIONS
Inspect contents of the box to ensure all parts are included and undamaged.
1
6
5
4
A flathead screwdriver is required for
mounting the wall bracket.
PARTS LIST:
Solar Sierra Light Head Fixture
1
Connector
2
3
Ground Stake
Ground Connector w/Point
4
5
Deck/Wall/Fence Mounting Bracket
6
Mounting Screws (2)
Select a location with full, direct sunlight.
Shady locations will not allow the battery to
charge fully and will reduce the hours of
nighttime light.
NOTE:
The rechargeable Ni-Cd battery
must be allowed to fully charge to
operate properly. Partially
charging the battery on a
consistent basis will drastically
reduce the life of the battery.
The selected location should not be near a
nighttime light source such as a porch light
or street light, as these might keep the solar
lights from automatically turning on. The
solar lights should not be placed closer than
5 feet from one another. This could cause the
solar lights to flicker from the adjacent light
source.
2