Extra-long running solar powered accent lights (8 pages)
Summary of Contents for Brinkmann Metal
Page 1
INS_828-0302-0_Metal 11/3/08 6:02 PM Page 1 LED low voltage Metal landscape lights OWNER’S MANUAL/MANUAL DEL PROPIETARIO ASSEMBLY AND OPERATING INSTRUCTIONS INSTRUCCIONES DE ARMADO Y OPERACIÓN NOTICE TO INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE LIGHT OWNER FOR FUTURE REFERENCE. AVISO PARA EL INSTALADOR:...
• Additional lights can be added to increase the number of lights in your light set to a maximum of 15 lights total per transformer. Only use Brinkmann lights that are designed to be used with this system. Never exceed 15 lights per transformer.
INS_828-0302-0_Metal 11/3/08 6:02 PM Page 3 SET UP INSTRUCTIONS Inspect lights, transformer and power cords to ensure that they are undamaged. READ ALL WARNINGS AND INSTRUCTIONS BEFORE PROCEEDING. Step 1 Lay out the low voltage lights in predetermined area. Cords allow for a maximum spacing of 10 feet between lights.
INS_828-0302-0_Metal 11/3/08 6:02 PM Page 4 INSTALLING THE TRANSFORMER Photo Sensor Step 1 Install the transformer photo sensor outdoors away from other light sources such as porch lights or street lights. These light To First Light sources may keep the dawn to dusk photocell sensor from activating the lights automatically at night.
• Se pueden agregar luces adicionales para incrementar el número de luces en su juego lumínico hasta un máximo de 15 luces en total por transformador. Sólo use las luces Brinkmann diseñadas para usar con este sistema. Nunca exceda las 15 luces por transformador.
INS_828-0302-0_Metal 11/3/08 6:02 PM Page 6 INSTRUCCIONES DE INSTALACIÓN Inspeccione las luces, el transformador y los cables de alimentación para asegurarse de que no estén dañados. LEA TODAS LAS INSTRUCCIONES Y ADVERTENCIAS ANTES DE PROCEDER. Paso 1 Acomode las luces de bajo voltaje en un área predeterminada. Los cables permiten un espaciamiento máximo de 10 pies (3,05 m.) entre las luces.
Page 7
INS_828-0302-0_Metal 11/3/08 6:02 PM Page 7 PARA INSTALAR EL TRANSFORMADOR Fotosensor Paso 1 Instale el transformador fotosensor en el exterior, alejado de otras fuentes A la de luz tales como las luces del porch o las luces de la calle. Estas fuentes Primera Luz de luz pueden interferir con el sensor de la fotocélula del amanecer al anochecer en la activación automática de las luces por la noche.
The Brinkmann Corporation requires reasonable proof of purchase. Therefore, we strongly recommend that you retain your sales receipt or invoice. To obtain repair or replacement of your Brinkmann Low Voltage Lights under the terms of this warranty, please call Customer Service Department at 800-527-0717 for a Return Authorization Number and further instructions.