Changing Battery - Brinkmann ENDURA Owner's Manual

Extra-long running solar powered l.e.d. garden accent lights
Table of Contents

Advertisement

IMPORTANT: The EPA Certified RBRC
Recycling Seal on the nickel-cadmium (Ni-Cd)
battery contained in our product indicates The
Brinkmann Corporation is voluntarily participating
in an industry program to collect and recycle
these batteries at the end of their useful life,
when taken out of service in the United States
or Canada. The RBRC
to placing used Ni-Cd batteries into the trash or the municipal
waste stream, which may be illegal in your area. Please call
1-800-8-BATTERY™ for information on Ni-Cd battery recycling and
disposal bans/restrictions in your area. The Brinkmann Corporation's
involvement in this program is part of our commitment to preserving
our environment and conserving our natural resources.
Hanger
Lens
®
program provides a convenient alternative
Top Housing
Battery
Lens
Top Housing
Hanger Prongs
Top Housing
Battery
Top Housing
®
Battery
Battery Compartment Lid
Battery Compartment Lid

Changing Battery

LEGACY SOLAR LIGHT
Step 1
Remove lens from top housing by turning
lens clockwise.
Step 2
With top housing upside down (solar
panel facing down), push tab on battery
compartment lid and remove the lid.
Step 3
Remove battery. Replace with new
Ni-Cd rechargeable battery.
Step 4
Replace battery compartment lid.
Step 5
Attach the lens by aligning the slots
with the grooves in top housing. Turn
counter-clockwise to lock in place.
HAMPTON SOLAR LIGHT
Step 1
Remove hanger from top housing by gently
pulling hanger prongs out of top housing.
Step 2
Remove lens from top housing by turning
lens clockwise.
Step 3
With top housing upside down (solar
panel facing down), push tab on battery
compartment lid and remove the lid.
Step 4
Remove battery. Replace with new
Ni-Cd rechargeable battery.
Step 5
Replace battery compartment lid.
Step 6
Attach the lens by aligning the slots
with the grooves in top housing. Turn
counter-clockwise to lock in place.
Step 7
Replace hanger in top housing by gently
pushing hanger prongs in sides of top
housing.
NOTE:
These lights utilize L.E.D. (Light
Emitting Diode) technology. There are
no bulbs to replace.
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Endura legacyEndura hampton822-0415-0822-0416-0822-0415-2822-0416-2 ... Show all

Table of Contents