Table of Contents
Advertisement
IMPORTANT: The EPA Certified RBRC
Seal on the nickel-cadmium (Ni-Cd) battery contained in
our product indicates The Brinkmann Corporation is
voluntarily participating in an industry program to collect
and recycle these batteries at the end of their useful life,
when taken out of service in the United States or Canada.
The RBRC
placing used Ni-Cd batteries into the trash or the municipal waste stream, which
may be illegal in your area. Please call 1-800-8-BATTERY™ for information on
Ni-Cd battery recycling and disposal bans/restrictions in your area. The
Brinkmann Corporation's involvement in this program is part of our commitment
to preserving our environment and conserving our natural resources.
Lens
Top Housing
®
®
program provides a convenient alternative to
Top Housing
Tabs
Battery Compartment Lid
Battery
Battery Recycling
Changing Battery
Step 1
Step 2
Step 3
Step 4
Step 5
NOTE:
Cleaning
It is important that the solar panel is kept free of
dirt and debris. A dirty solar panel will not allow
the battery to fully charge. This will shorten the
life of the battery and cause the light to
malfunction. Clean regularly with a dampened
cloth or paper towel.
Remove lens from top housing by turning
lens clockwise.
With top housing upside down (solar panel
facing down), push tab on battery
compartment lid and remove the lid.
Remove battery. Replace with new
Ni-Cd rechargeable battery.
Replace battery compartment lid.
Attach the lens to top housing by aligning the
tabs on lens with the slots in top housing.
Turn counter-clockwise to lock in place.
These lights utilize L.E.D. (Light Emitting
Diode) technology. There are no bulbs to
replace.
4
Advertisement
Table of Contents
