Important Safety Information; Safety Rules - CEN-TECH 47257 Operating Instructions Manual

saVe this Manual
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product's
serial number in the back of the manual
near the assembly diagram (or month and
year of purchase if product has no num-
ber). Keep this manual and the receipt in a
safe and dry place for future reference.
iMpOrtant saFetY
inFOrMatiOn
in this manual, on the labeling,
and all other information
provided with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
situation which, if not
avoided, will result in death or
serious injury.
situation which, if not
avoided, could result in death
or serious injury.
symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
SKU 47257
Danger indicates
a hazardous
Warning indicates
a hazardous
CautiOn, used
with the safety alert
For technical questions, please call 1-800-444-3353.
not related to personal injury.
symbol, is used to address
practices not related to
personal injury.
general anD speCiFiC

saFetY rules

Warning! read all
instructions.
Failure to follow all instructions
listed below may result in
serious injury.
saVe these instruCtiOns
1. Work area safety
a. Keep out of the reach of children.
b. Wear ansi-approved safety
goggles during use.
c. read this manual before use.
d. Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
e. When not in use, store in a dry
location.
f. this Digital Caliper was designed
for specific tasks. Do not modify
this tool and do not use it for pur-
poses for which it was not intended.
g. Do not operate while you are
tired, or under the influence of
alcohol or drugs. A moment of
inattention may result in damage to
your project and/or personal injury.
h. Maintain labels and nameplates
on the tool. These carry important
safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
nOtiCe is used to
address practices
CautiOn, without
the safety alert
Page 2