List Of Parameters Classified By Purpose Of Use - Mitsubishi Electric FR-E500 Instruction Manual

4.1.2 List of parameters classified by purpose of use

Set the parameters according to the operating conditions. The following list indicates
purpose of use and corresponding parameters.
Purpose of Use
Operation mode selection
Acceleration/deceleration time/pattern
adjustment
Selection of output characteristics
optimum for load characteristics
Output frequency restriction (limit)
Operation over 60Hz
Adjustment of frequency setting
signals and outputs
Motor output torque adjustment
Brake operation adjustment
Multi-speed operation
Jog operation
Frequency jump operation
Automatic restart operation after
instantaneous power failure
Optimum acceleration/deceleration
within continuous rated range
Slip compensation setting
Output stop method selection
General-purpose magnetic flux vector
control operation
Electromagnetic brake operation timing Pr. 42, Pr. 190 to Pr. 192
Offline auto tuning setting
Sub-motor operation
Regenerative function selection
Operation in communication with
personal computer
Operation under PID control
Noise reduction
Parameter Numbers
Parameter numbers which must be set
Pr. 79
Pr. 7, Pr. 8, Pr. 20, Pr. 21, Pr. 29
Pr. 3, Pr. 14, Pr. 19
Pr. 1, Pr. 2, Pr. 18
Pr. 1, Pr. 18, Pr. 38, Pr. 39, Pr. 903, Pr. 905
Pr. 38,Pr. 39, Pr. 73, Pr. 902 to Pr. 905
Pr. 0, Pr. 80
Pr. 10, Pr. 11, Pr. 12
Pr. 1, Pr. 2, Pr. 4, Pr. 5, Pr. 6, Pr. 15, Pr. 24,
Pr. 25, Pr. 26, Pr. 27, Pr. 232, Pr. 233, Pr. 234,
Pr. 235, Pr. 236, Pr. 237, Pr. 238, Pr. 239
Pr. 15, Pr. 16
Pr. 31, Pr. 32, Pr. 33, Pr. 34, Pr. 35, Pr.36
Pr. 57, Pr. 58
Pr. 60
Pr. 245 to Pr. 247
Pr. 250
Pr. 80
Pr. 82 to Pr. 84, Pr. 90, Pr. 96
Pr. 0, Pr.3, Pr. 7, Pr. 8, Pr. 9, Pr. 44, Pr. 45,
Pr. 46, Pr. 47, Pr. 48
Pr. 30, Pr. 70
Pr. 117 to Pr. 124
Pr. 73, Pr. 79, Pr. 128 to Pr. 134, Pr. 180 to Pr.
183, Pr. 190 to Pr. 192
Pr. 72, Pr. 240
70
PARAMETERS