Chapter 5: Miscellaneous; Error Messages - Furuno TECDIS Installation Manual

TECDIS Installation Manual

Chapter 5: Miscellaneous

5.1 Error Messages

TECDIS includes automatic error detection in most functions. If it is possible, corrective
measures will be taken without requiring operator intervention. In case of critical errors, the
operator is notified. In addition to the possible error situations listed here, both the Windows
operating system and support routines may in some instances display error messages not listed.
Common to these error messages is that corrective measures (if possible) are initiated by
restarting the ECDIS. In the case of a system failure any error messages should therefore be
noted. If the ECDIS is not responding or appear to be malfunctioning, try restarting the ECDIS.
If this does not correct the error situation, notify your support contact.
10=Init required too much space
11=Bad init parameters
12=Data files not found
13=Open db cannot determine type of file
14=Data files appear to be corrupted
16=Could not create index file
17=Could not create data file
18=Tried to create existing index file
19=Tried to create existing data file
24=Could not close file
46=File number already in use
47=c-tree has not been initialized
101=C-Map system files not installed
102=No C-Map charts installed!
103=No chart database set as default!
104=g_manager->Init() failed
105=g_map->Init() failed
106=g_mini->Init() failed
107=Update successfully completed
108=g_map->SetZoom() failed
109=g_map->SetScale() failed
110=g_mini->SetScale() failed
111=g_map->SetRotation() failed
112=g_mini->SetRotation() failed
113=g_map->AddBase() failed
177=Not TECDIS dongle
188=Error in periodic ID check
189=File read failed
Memory full or error. Try restarting ECDIS.
System error, should not normally occur.
Old data file has been erased or destroyed.
New (empty) data file is automatically
generated.
Installation error, use of invalid data.
Try restarting ECDIS to generate new data
file.
Hard drive error or full, try erasing old data.
Hard drive error or full, try erasing old data.
System error, should not normally occur.
System error, should not normally occur.
System error, probably memory error.
System error, should not normally occur.
System error, should not normally occur.
Incorrect or incomplete installation.
Incorrect or incomplete installation.
Incorrect or incomplete installation.
System error, should not normally occur.
System error, should not normally occur.
System error, should not normally occur.
Update confirmation.
System error, should not normally occur.
System error, should not normally occur.
System error, should not normally occur.
System error, should not normally occur.
System error, should not normally occur.
System error, should not normally occur.
License dongle found but not approved.
No license dongle found or approved.
Error in license dongle.
Page 60