Using The Headphones With Multiple Devices; Pairing Another Device; Managing Multiple Connections; Scrolling Through Other Paired Devices - Bose SoundLink Owner's Manual

Operation

Using the headphones with multiple devices

The headphones can remember up to eight paired devices and can be actively
connected to two devices at a time.

Pairing another device

1.
Slide all the way up to the
new device" or you see the Bluetooth indicator blinking blue.
2.
On your mobile device, make sure Bluetooth is on.
(The Bluetooth menu is usually found in the Settings menu.)
3. Select Bose OE SoundLink from the device list.
You will hear, "Connected to <device name>" or you will see the Bluetooth
indicator glow solid white.

Managing multiple connections

When powered on, the headphones will automatically connect to the two most
recently connected devices.
When two devices are actively connected, you can play music from either device.
To switch between connected devices, pause the first device and play music from
the second.

Scrolling through other paired devices

To play music from a device in the headphone memory that is not currently
connected:
1. Slide all the way up to the
are currently connected.
2. Within three seconds, slide
again to connect to the next paired device.
3. Repeat step 2 until you hear the correct device name.
Note: To use this feature, voice prompts must be on. (See "Turning voice
prompts off/on" on page 9.)
Note: If a device is not within Bluetooth range, 33 ft. (10 m), scroll to the next
device.

Clearing the headphone memory

To clear the headphone memory of all devices:
1.
Slide all the way up to the
hear "Bluetooth device list cleared."
2. Delete Bose OE SoundLink from your mobile device's Bluetooth list.
All Bluetooth devices are cleared and the headphones are ready to pair.
10 - English
symbol and hold until you hear, "Ready to pair
symbol and release to hear which device(s)
all the way up to the
symbol and hold for 10 seconds, until you
symbol and release