Page 3
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose ® Corporation is under license.
Contents Introduction Thank you ......................6 Unpacking ......................6 Headphone components ..................7 Operation Charging the battery ................... 8 Battery indicator ..................8 Selecting a language for voice prompts ............8 Turning voice prompts off/on ..............9 Pairing the first mobile device ................9 Playing music .......................
® ® ® headphones. These wireless stereo headphones combine the audio performance and comfort you expect from Bose with the freedom to move away from your source. Unpacking Check the carton for: the Bose SoundLink on-ear Bluetooth headphones, audio cable, USB charging cable, and carry case. Be sure to save all packing materials.
Operation Charging the battery Plug the small end of the USB cable into the micro-USB connector on the headphones right earcup. Plug the other end into a USB wall charger or computer that is powered on. Allow up to three hours to fully charge the battery. A full charge will power the headphones for up to 15 hours.
On your mobile device, make sure the Bluetooth feature is on. (The Bluetooth menu is usually found in the Settings menu.) Select Bose OE SoundLink from the device list. You will hear, “Connected to <device name>” or you will see the Bluetooth indicator glow solid white.
10 seconds, until you hear “Bluetooth device list cleared.” Delete Bose OE SoundLink from the Bluetooth list on your mobile device. All Bluetooth devices are cleared and the headphones are ready to pair. 10 - English...
White blinking: Connecting White solid: Connected Battery indicator (while in use) Green: Full charge Amber: Medium charge Red blinking: Charge needed Battery charge level (for iOS devices) When connected to the Bose SoundLink on-ear Bluetooth headphones, ® ® ® iOS devices will display the headphone battery charge level near the upper right corner of the screen.
Operation Using the back-up audio cable Use the supplied back-up audio cable to connect a non-wireless device, or if the headphone battery is depleted. To use the audio cable: Plug the audio cable into the connector on the left earcup. Plug the audio cable into the connector on the device.
Then try pairing again. mobile device • Delete Bose OE SoundLink from the Bluetooth list on your mobile device. Then try pairing again. • Move the mobile device closer to the headphones and away from any interference or obstructions.
Do not allow moisture to get inside the earcups or the audio input connector. Do not use liquids or sprays. Replacement parts and accessories Replacement parts and accessories can be ordered through Bose Customer Service. See “Customer service” on page 15. 14 - English...
Care and Maintenance Customer service For questions about your headphones, contact your local Bose dealer. • To contact Bose directly, visit: http://global.Bose.com • US only: http://owners.Bose.com/SoundLinkOE • You can also visit us at: youtube.com/Bose Limited Warranty Your Bose SoundLink on-ear Bluetooth headphones are covered by a limited ®...