Furuno NX-700A Operator's Manual page 30

2. OPERATION
Printing messages automatically
1. Press the MENU/ESC key to open the main menu.
2. Press ▲ or ▼ to choose NAVTEX, and then press the ENT key to show the
NAVTEX menu.
3. Press ▲ or ▼ to choose Auto Print, and then press the ENT key to open the
auto print options.
4. Press ▲ or ▼ to choose All, User Select or Off as appropriate.
All: Prints all messages.
User Select: Prints only the specified messages at User Select Station & Msg
on the NAVTEX menu.
Off: All messages are not printed automatically.
5. Press the ENT key.
6. Pres the MENU/ESC key several times to close the menu.
Canceling printing
When a menu is displayed, you cannot cancel the printing.
1. Press the PRINT key while showing the messages to open the print window.
2. Press ▼ to choose "Cancel Print" and then press the ENT key.
2-10
Off
All
User Select
Auto print options