Confirming The New Message - Furuno NX-700A Operator's Manual

2. OPERATION
Note: If NG appears for any test, try to press any key to go to the next stage.
The equipment, however, may not be operated properly. Contact your
dealer if the problem persists.
2.3 Adjusting LCD Dimmer
You can adjust LCD brilliance with the + DIM – key. The adjustment range is 0
(dark) to 9 (bright).
+: Raises the dimmer.
-: Decreases the dimmer.
2.4

Confirming the New Message

When you receive a new message, do one of the following depending on
message received.
SAR (Search and Rescue) message
1. When receiving an SAR message is received, the audible alert sounds and
details for the SAR message appear.
2. Press any key other than
Other messages
1. When a message other than an SAR message is received, the display shows
one of the following windows.
2. If you want to read the message immediately, press ◄ to choose "Yes" and
then press the ENT key. to display the message
To read the message later, choose "No" or press the MENU key, and then
press the ENT key to close the window.
Note: In the default setting, all received messages are printed out automatically
for NX-700A only. For further details, see paragraph 2-12.
2-2
Icon for SAR message
Received new int'l msg.
Display new msg ?
Yes No
International message
key to silence the alarm.
Received new local msg.
Display new msg ?
Local message
Yes No