Main Menu Control - Lorex L21Q784 Instruction Manual

MAIN MENU CONTROL

The Main Menu is pulled up by pressing the Menu button. Scroll up and down through the eight
options by pressing the
where the highlighted scroll bar is located. To exit the Main Menu, scroll down to the Exit option
and press Menu. Note: in submenus of the Main Menu, you can either exit Menu mode entirely
by selecting Exit, or you can return to the Main Menu by selecting Return.
1. Time / Date Set - This submenu allows you to change the Time and
Date displayed on the monitor, and also program how you'd like for
the information to appear in the on-screen display.
i) DISP MON: Selecting [Y] enables on screen display of the date & time
Selecting [N] hides this information.
ii) DISP REC: Selecting [Y] will cause the date & time info to be recorded
to tape. Selecting [N] prevents will prevent the on-screen
display from being recorded.
Note: To avoid the VCR's Time/Date OSD to be overlapping during recording or VCR mode,
please turn OFF the time/date display on your VCR.
iii) TIME: Change the time (24 hour clock)
iv) DATE: Change the date.
v) DATE FORMAT: There are three formats to display the date:
2. Sequence Set - This menu allows you to select how long you'd like each channel to appear
on-screen before automatically switching to the next channel in Sequence mode. The Dwell
Time is 0-59 seconds selectable for each of the 8 channels and for Quad mode.
Note : Channels without a camera, a Video Loss, or a Dwell Time of zero will be skipped in
sequencing.
3. PIP/POP Set - This sub-menu allows you to change the positioning of
i) PIP/ Dual PIP/POP screens on the monitor, as well as choosing how
PIP Sequencing works.
ii) PIP SEQUENCE: Selecting [SUB] (the default setting) causes the
iii) PIP POSITION:
[00]
iv) POP POSITION: There are two different viewing options for POP display.
and arrow keys. To enter a sub-menu, press the Menu button
MM-DD-YYYY : for U.S.A.
YYYY-MM-DD : for Asian countries.
DD-MM-YYYY : for European countries.
subpicture to rotate between cameras while the
Main screen remains fixed during PIP Sequencing.
Selecting [MAIN] will make the Main screen rotate
while the subpicture remains fixed.
There are four positions in which the sub channels can be set:
[01] [02] [03]
[TIME / DATE SET]
DISP MON : [Y]
DISP REC : [Y]
TIME : 14:35:23
DATE : 02/18/2003
DATE FORMAT: MM-DD-YY
RETURN : [↲]
EXIT : [↲]
[PIP / POP SET]
PIP SEQUENCE: [SUB]
PIP POSITION : [01]
POP POSITION : [00]
RETURN : [↲]
EXIT : [↲]
-9-