Minolta Dynax 7xi Instruction Manual page 53

• If the aperture display blinks, the aperture required for a correct
exposure at the shutter speed you have selected is not available. If the lens'
minimum aperture blinks, set a faster shutter speed; if the maximum
aperture blinks, set a slower shutter speed
• If the metering indicators
light level is beyond the coupling range of the camera and lens. In bright
light, attach a neutral density filter; in low light, use a faster lens or faster
film.
• You cannot select BULB in S mode. See next section.
blink in the viewfinder data panel, the
51