Exposure Compensation - Minolta Dynax 7xi Instruction Manual

This function enables you to bias the camera's exposure calculation up to
+ / - 4 stops.
To set:
1. Press the dial function selector button once;
will appear in the
viewfinder.
2. Turn the rear control dial until the compensation figure you want
appears in the viewfinder and body data panels.
3. Press the shutter release button partway down to enter the exposure
factor and return to normal operating mode or wait 4 sec. for your selection
to be entered automatically. The exposure which appears in the viewfinder
and body data panels will include this factor.
-NEXT PAGE-
56