Detachments - Toshiba RAV-SM1103AT-E1 Service Manual

RAV-SM1103AT-E1, RAV-SM1403AT-E1
No. Part name
Common
procedure
1. Detachment
1) Stop operation of the air conditioner, and
2) Remove the front cabinet.
3) Remove the cover of the terminal block.
4) Disconnect the connecting cables and
5) Remove the roof plate.
2. Attachment
1) Attach the roof plate.
2) Connect the connecting cable and power
3) Attach the cover of the terminal block.
4) Attach the front cabinet.

13. DETACHMENTS

Procedure
CAUTION
Never forget to put on the gloves at working
time, otherwise an injury will be caused by the
parts, etc.
also turn off switch of the breaker.
(M4 (Hexagon) x 10, 3 pcs.)
• After taking off screws, remove the front
cabinet by pulling it downward.
(M4 x 8, 2 pcs.)
power cord from the terminals and cord
clamp.
(M4 (Hexagon) x 10, 6 pcs.)
(M4 (Hexagon) x 10, 6 pcs.)
cord at the terminal and fix them with cord
clamp.
(M4 x 8, 2 pcs.)
CAUTION
Using bundling band sold at a market, be sure
to fix the power cables and indoor/outdoor
connecting cables along the inter-unit cable
so that they do not come to contact with the
compressor, valves and cables at gas side,
and the discharge pipe.
(M4 (Hexagon) x 10, 3 pcs.)
Front
cabinet
– 82 –
Remarks
Screw
Cover of the terminal block
Roof plate
Screw