MULTIQUIP FCG1 SERIES Operations & Parts Manual page 7

FCG1 CONCRETE SAW— SAFETY MESSAGE ALERT SYMBOLS
Accidental Starting
ALWAYS place the engine ON/OFF
switch in the OFF position, when the saw
is not in use.
Over Speed Conditions
NEVER tamper with the factory settings of the
engine governor or settings. Personal injury
and damage to the engine or equipment can
result if operating in speed ranges above
maximum allowable.
Guards and Covers In Place
NEVER operate the saw without blade guards
and covers in place. Adhere to safety
guidelines ANSI American National
Standards Institute, OSHA or other applicable
local regulations.
Rotating Blade
Rotating blade can cut and crush. Keep
hands and feet clear.
This concrete saw , other property,
NOTE or the surrounding environment
could be damaged if you do not
follow instructions.
FCG1 CONCRETE SAW — OPERATION & PARTS MANUAL — REV. #1 (10/08/02) — PAGE 7
Respiratory Hazard
ALWAYS wear approved respiratory protection.
Sight and Hearing hazard
ALWAYS wear approved eye and hearing
protection.
Equipment Damage Messages
Other important messages are provided throughout this manual
to help prevent damage to your concrete saw, other property, or
the surrounding environment.