Toshiba Satellite M300 Maintenance Manual page 149

Replacement Procedures
7. Remove the following screws securing the LCD unit.
•
8. With the bottom edge of the LCD unit on the display cover, lift only the top edge of
the LCD unit. After peeling off the CONDUTIVE tape, disconnect the LCD harness
from the connector on the back of the LCD.
9. Remove the LCD unit.
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
M2.5x5.0 BINK HEAD screw
M2.5×5.0 2 screws
Figure 4-32 Remove the LCD unit
x2
52