Optical Disk Drive - Toshiba Satellite M300 Maintenance Manual

Replacement Procedures
4.8

Optical disk drive

NOTE: Do not apply excessive force to the top of an optical disk drive.
Do not touch the shaded portion of the figure below, when the drive is removed
or installed.
Remove an optical disk drive
The following describes the procedure of removing an optical disk drive (See Figure 4-12 to
4-15).
1. Remove the following screw of wireless cover securing Memory Module Cover and
remove it.
• 2.5 x 4.0B
2. Remove the following screw of optical disk drive BKT screw.
• 2.5 x 4.0B
3. Remove the following screw of side bracket.
• 2.0 x 3.0B
Memory
Module Cover
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
BIND screw
BIND screw
BIND screw
Figure 4-12Remove Memory Module Cover
4-27
x3
x1
x3