4.13 Base latch
4.13 Base latch
Removing the base latch
The following describes the procedure for removing the base latch. (See Figure 4-21.)
1. Remove the base latch while releasing the latches of the back.
Installing the base latch
The following describes the procedure for installing the base latch (See Figure 4-21).
1. Install the base latch to the slot of the base assembly.
Satellite R20/TECRA M7 Maintenance Manual (960-572)
Base latch
Figure 4-21 Removing the base latch
4 Replacement Procedures
Latch
[CONFIDENTIAL]
4-35