Toshiba Satellite R20 Maintenance Manual page 293

Hide thumbs Also See for Satellite R20:

Table of Contents

4.21 GPU heat sink

Installing the GPU heat sink

The following describes the procedure for installing the GPU heat sink. (See Figure 4-33.)

1. If there is already silicon grease on the GPU and GPU heat sink, clean it with a cloth.

Using a special applicator, apply silicon grease so that the GPU chip on the GPU is

completely covered.

NOTE: For details on applying the silicon grease, refer to Installing the CPU.

2. Install the GPU heat sink and secure it with the following screws.

3. Stick the insulator in place.

Satellite R20/TECRA M7 Maintenance Manual (960-572)

4 Replacement Procedures

[CONFIDENTIAL]

Chapters

Table of Contents