Radio Shack TRS-80 PC-3 Owner's Manual page 99

COMMANDS
1 ClOAD
2
ClOAD
"filename"
Abbreviations: ClO., ClOA.
See also: ClOAD?, CSAVE, MERGE, PASS
Purpose
The ClOAD command is used to load a program saved on cassette tape. It can only be used with the optional PC-3 Printer/
Cassette Interface.
Use
The first form of the CLOAD command clears the memory of existing programs and loads the first program stored on the tape,
starting at the current position.
The second form of the CLOAD command clears the memory, searches the tape for the program whose name is given by "file-
name", and loads the program.
If the PC-3 Computer is in the PROgram or RUN mode, program memory is loaded from the tape. When the Computer is in the
ReSerVe mode, reserve memory is loaded. Care should be taken not to load programs into reserve memory or reserve characters
into program memory.
99