Loading Scenes And Presets From Vsl - PRESONUS AudioBox 1818VSL Owner's Manual

Owner's Manual

Loading Scenes and Presets from VSL

4.1.5
Loading a Scene
Loading an Entire Fat Channel Preset
Loading an FX Preset
Software: Virtual StudioLive and Studio One Artist
To load a Scene or preset from the VSL Browser window, you
simply select it and drag it over the mixer or channel on which
you wish to load it. Scenes and presets can be dragged from
either the On Disk or the Device Memory section of the Browser
and dropped onto the Overview or the Fat Channel tab.
To load a new Scene, select it from the Browser window and drag it over
the VSL mixer in either the Overview or the Fat Channel tab. The window
will gray out, indicating that a new Scene is about to be loaded.
To load every component in a Fat Channel preset (Gate, Compressor, EQ),
select it from the Browser window and drag it over any part of the desired
channel. If you drag it over any of the component Microviews, it will load
only that component; for example, if you drag a preset over the Gate
Microview, only the Gate will be loaded.
To load an FX preset, select it from the Browser window, and drag it over
any part of the desired FX bus in the Master section of the Overview tab.
Once the preset is loaded, you can use the FX Type menu to change the
effect and create new presets.
4
Virtual StudioLive 4.1
29 29 29