Programming The Volume; Reset To Factory Settings; Emptying The System - Nespresso BEC300 Instruction Manual

PROGRAMMING THE WATER VOLUME
11
Any control can be programmed.
Completely open the slider and insert a
Nespresso capsule.
EMPTYING THE SYSTEM before a period of non-use, for frost protection or before a repair
11
1
2
To note, the machine remains blocked
for 10 minutes after emptying! Remove
the water tank.
Place a container under the coffee
outlet.
12
3
1
2
Touch and hold the control while closing
the slider. Release control when desired
volume is reached. The other 2 controls
flash for confirmation. Water volume
level is now stored in the control used
during programming.
12
2
6 sec
1
3
Open slider. Press and hold the Ristretto
& Lungo controls together for at least
6 sec. The other control flash for con-
firmation. Then close the slider to start
procedure.

RESET TO FACTORY SETTINGS

11
>4 sec
Press and hold the Espresso & Lungo
controls together for at least 4 sec. The
other control flashes for confirmation.
13
Power OFF
Machines turns to Off mode automati-
cally when empty.
Factory settings are:
EN
1. Lungo, Espresso, Ristretto controls
110 ml / 3.7 oz, 40 ml / 1.35 oz.,
25 ml / 0.84 oz.
2. Automatic Off mode after
9 minutes.
3. Most frequently chosen cup size
as Espresso control at 40 ml /
1.35 oz.
9