Nespresso BEC300 Instruction Manual page 11

15
Blinking light: heating up
Steady light: ready
19
Refill the water tank with the used des-
caling solution collected in the container
and touch any control to repeat the
procedure.
16
1
3 sec
2
To enter the descaling mode, at slider
closed push all the 3 controls simultane-
ously for at least 3 sec. A short beep will
confirm it. Open the slider.
1 1 0
max.
Empty and rinse the water tank, capsule
container, drip tray and cup support
thoroughly. Fill water tank with potable
water.
17
3 sec
Push all the 3 controls simultane-
ously for at least 3 sec. A short beep will
confirm it. The control area will start
blinking quickly.
1 1 1
When ready, touch any control to rinse
the machine. Machine will stop when
done.
18
Close the slider to start descaling.
Machine stops when water tank is
empty.
1 1 2
To exit the descaling mode, push all the 3
controls simultaneously for at least 3 sec. A
short beep will confirm this. The machine is
now ready for use.
11
EN