First Use - Nespresso BEC300 Instruction Manual

FIRST USE

11
EN
Remove the water tank and capsule
container. Adjust the cable length and
store the excess under the machine.
15
Place the water tank on its arm, it is
fixed with magnets. Insert the drip tray
and the capsule container in position.
For your safety, operate the machine
only with drip tray and capsule con-
tainer in position.
6
First read the safety precautions to avoid risks of fatal electrical shock and fire.
12
Insert the remaining cable in the guide
under water tank left or right socket,
depending on the position chosen for
the water tank. Ensure machine is in the
upright position.
16
Turn the machine ON by opening the
slider and pushing it towards the back
of the machine. Light will blink on one
of the coffee touches: heating up for
approximately 25 seconds Steady light:
ready.
13
Plug the machine into the mains.
17
>3 sec
The machine can be turned into Off
mode at any time by pushing and
holding any touch control for more than
3 sec., confirmed by the other 2 controls
flashing.
14
Rinse the water tank before filling it with
potable water.
18
Place a container under coffee outlet.
Press the Lungo control. Close the slider
to rinse the machine. Repeat three
times.