The Outgoing Message; Recording An Outgoing Message; Checking An Outgoing Message; Answering Machine Settings - Geemarc CL210A Instructions Manual

ANSWERING MACHINE

Recording an Outgoing Message

Press and hold . You will hear a short beep and the display will
show
Record your outgoing message. Speak clearly towards the machine
from a distance of 6-8 inches (minimum of 5 seconds and
maximumof 60 seconds)
Release
The outgoing message will be repeated after a few seconds. Repeat
this procedure if you want to change the message, any old outgoing
message will automatically be erased when a new one is recorded.
Checking the Outgoing Message
Press . The current outgoing message will now be played.
To stop playing the outgoing message, press
machine.
rA
to stop recording
on the answering
17
ANSWERING MACHINE

Answering Machine Settings

Use the 2\ 6 \TS switch on the right side of the telephone to select the
number of rings before the answering machine is activated and responds
to an incoming call.
• 2 = calls are answered after two rings
• 6 = calls are answered after six rings
• TS (TOLL SAVER) = activates the toll saver function
In Toll Saver mode incoming calls are answered after six rings until the
first new message has been recorded. Once a message has been
recorded the answering machine will answer after approximately two rings.
This is useful when trying to remotely access the answering machine. If
the answering machine has not answered at the fourth ring, no
messages have been recorded and you can hang up before you are
charged for the call. If the machine answers after two rings, new
messages have been recorded.
18