To delete the OGM (SET OGM to DEFAULT)
Press the MENU/OK/MUTE button to show "PHONEBOOK".
Press the UP button to show "TAM".
Press the MENU/OK/MUTE button to show "MESSAGE".
Press the UP button to show "TAM SETTINGS".
Press the MENU/OK/MUTE button to show "TAM ON/OFF".
Press the DOWN button to show "SET OGM".
Press the MENU/OK/MUTE button to show "OGM1".
Press the UP or DOWN button to choose "OGM1" or "OGM2".
Press the MENU/OK/MUTE button to select it and show "PLAY".
Press the UP or DOWN button to show "DEFAULT".
or
Press the MENU/OK/MUTE and the display will show "CONFIRM?"
Press the MENU/OK/MUTE to confirm. You will hear a beep, the display will
return to "DEFAULT" .
Press the PHONE BOOK/CANCEL until you return to idle mode.
Switch between OGMS
When the answering machine is switched ON you can select OGM1 or OGM2.
Press the STOP/ON/OFF and if you hear "ANSWER ON, ANNOUNCEMENT 1",
you are currently using OGM1.
If you want to switch to OGM2, press the STOP/ON/OFF again, and you will hear
"ANSWER ON, ANNOUNCEMENT 2".
If you want to switch itbackonto OGM1, press the STOP/ON/OFF again.
To play/pause messages on TAM
If you have new messages, the Message light will flash and the
display will show e.g. 01/02 MSGS, which means you have 1 new message/2 messages altogether.
* There is approximately this must be confirmed - the sample tested has much more
- should it be 60 minutes? of recordingtime ontheTAM.
Binatone Help Line : 0845 345 9677
30