To Change Security Code (Tam Pin); To Reset Tam To Default Settings - Binatone Speakeasy Combo 3410 User Manual

Press the PHONE BOOK/BACK until you return to idle mode.

To Change Security Code (TAM PIN)

The security code is used to access the remote control or default the TAM,
and is a 4-digit code. The default code is "0000" .
Press the MENU/OK/MUTE. Scroll UP until "TAM", press the
MENU/OK/MUTE and you will see "MESSAGE".
Scroll UP until the display shows "TAM SETTINGS". Then press the
MENU/OK/MUTE and you will see "TAM ON/OFF".
Scroll DOWN until the display shows "TAM PIN". Then press the
MENU/OK/MUTE and the display will show the current setting "0000".
Use the keypad to enter the new security PIN code.
Press the MENU/OK/MUTE and you will hear a beep. This display will return
to the previous menu.
Press the PHONE BOOK/BACK until you return to idle mode.

To Reset TAM to default settings

You will restore the following settings after you select this command.
- Ring setting: 5
TAM ON - OGM 1
-
Security code: 0 0 0 0
-
TAM Alarm: OFF
-
Press the MENU/OK/MUTE. Scroll DOWN until "TAM", press the
MENU/OK/MUTE and you will see "MESSAGE"
Scroll DOWN until the display shows "TAM SETTINGS". Then press the
MENU/OK/MUTE and you will see "TAM ON/OFF".
Scroll DOWN until the display shows "TAM DEFAULT". Then press the
MENU/OK/MUTE and the display will show "PIN CODE?".
Enter the PIN code using the keypad.
Then press the MENU/OK/MUTE to confirm, and the TAM settings will be defaulted.
Binatone Help Line : 0845 345 9677
.
34