Installation And Set-Up; Choose A Suitable Site For The Base Unit; Connect The Mains Power Lead; Plug The Main Adaptor Into Your Wall - Binatone iDECT X3i User Manual

Installation and Set-up

1
Choose a suitable site
for the base unit
(see page 3).
2
Connect the mains
power lead and the
telephone line cord
into the base unit.
Plug one end of the
telephone line cord into
the socket on the back of
the base. Use the telephone
line cord RJ11C supplied with your
iDECT X3i - other line cords
may not work with this phone.
3
Plug the mains adaptor into your wall
socket. If you have one or more charger
pods, plug in the mains adaptors
accordingly.
Make sure that the 120VAC, 50hz mains socket is switched OFF
when you plug the mains adapter into the socket. Switch it ON only
when you have the adaptor plugged in safely.
5