Binatone Spirit 410 User Manual

Binatone Spirit 410 User Manual

Corded telephone
Hide thumbs Also See for Spirit 410:

Advertisement

Spirit 410 Corded Telephone

Unpacking your phone

In the box you will find:
• Base Unit
• Handset
• Coiled Handset cord
• Telephone line cord
for Base unit
• User manual
Keep the packing
materials in a safe
place in case you later
need to transport
the unit.
Keep your sales (till)
receipt, which is your
guarantee.
Important note---back up batteries
The Spirit 410 requires 2 x 1.5V AAA size Alkaline batteries installed
into the battery compartment before use.
Warning: The caller display will not work without batteries installed.
1

Advertisement

Table of Contents
loading

Summary of Contents for Binatone Spirit 410

  • Page 1: Unpacking Your Phone

    Keep your sales (till) receipt, which is your guarantee. Important note---back up batteries The Spirit 410 requires 2 x 1.5V AAA size Alkaline batteries installed into the battery compartment before use. Warning: The caller display will not work without batteries installed.
  • Page 2: Where To Find It

    3. Scroll Up & Down buttons 4. Delete button 5. Set/Store button 6. Memory button 7. LNR(Last Number Redial) button 8. Speakerphone button 9. Mute button 10.R(Recall) button 11.Pause button Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
  • Page 3: Installation

    Press the cable into the groove so that the Base unit stands level. 5. Lift the Handset and check for Dial tone in the earpiece. Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
  • Page 4: Installing (Or Replacing) The Battery

    CHPNJ@T PBODDL= >E TMR CM LMQ ODNJ@BD QGD A@QQDOHDP< QGDT SHJJ ADBMKD QMQ@JJT CHPBG@OFDC @LC TMRO CHPNJ@T PBODDL SHJJ LMQ SMOI= SIZE SIZE SIZE SIZE Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
  • Page 5: Desk/Wall Mount Installation

    3. Desk/Wall mount installation Desk Mount To place the Spirit 410 on a desk, connect the stand to the bottom of the phone in the slots near the rear of the base as shown below. Insert the rigid clips of the stand into the slots on the bottom of the phone (near the rear of the base).
  • Page 6 Desk/Wall mounting continue... Insert the rigid clips of the stand into the slots on the bottom of the phone (near the front of the base). Press down firmly until the flexible clips clicks into place. To remove the stand, (1) pinch the flexible clips, (2) pull back the stand, and then (3) slide up and forward as shown below.
  • Page 7: Setting Up Your Phone

    Press UP or DOWN button to set the hour. When setting the 'hour', the 'AM' or 'PM' icon will automatically turn on to correspond the hour time. Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
  • Page 8 Press UP or DOWN button until the display shows 'SET 3 FLASH'. Press SET/STO to confirm. Press UP or DOWN button to select 100 (default), 300, 600, or 1000. Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
  • Page 9: Making A Call

    To end the call, return the Handset to the Base unit cradle. Last Number Lift the Handset. Redial Press LNR button. The phone automatically dials the last number you called (maximum of 32 digits). Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
  • Page 10: Mute Function

    Long Distance Access Codes. Use on PBX If you are using your Spirit 410 phone on a PBX, and the PBX user guide tells you to press RECALL; Press R (RECALL) button on your Spirit 410 phone.
  • Page 11: Caller Display Operation

    If you subscribe to a Caller Display service, you can see the phone number of the person calling you before you answer. The caller display information includes: The caller's number The date and time of the call Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
  • Page 12: Caller Display

    Caller Display list Spirit 410 dynamically stores up to 30 groups (12digits) incoming information. If a call is received when the Call list is full, then the new entry will replace the oldest one.
  • Page 13: Operational Notes

    TVs, fluorescent lights, etc. Cleaning and care Don’t clean any part of Spirit 410 with benzene, thinner or other solvent chemicals - this may cause permanent damage which is not covered by the Guarantee. When necessary, clean it with a damp cloth.
  • Page 14: Troubleshooting

    8. Troubleshooting The Spirit 410 must be serviced by trained engineers. NEVER attempt any repairs or adjustments yourself - you could make the problem worse and invalidate the guarantee. ALWAYS check you have followed the steps listed on Section 2 to first that: install and set up your Spirit 410.
  • Page 15 If the fault persists … Disconnect all other instruments connected to the same line as the Spirit 410 and see whether you can make a call. Disconnect the Base unit from the telephone line and plug a different phone into the master telephone socket.
  • Page 16: Guarantee And Service

    Please keep your sales (till) receipt - this is your guarantee. You should also keep the original packaging material. In the unlikely event that you need to return your Spirit 410 to our Repair Centre while it is under guarantee, there will be a £5 handling charge.
  • Page 17: Technical Details

    Network connection This equipment is intended to be used in the UK only. Operation on other countries’ PSTN termination points cannot be guaranteed. Declaration of conformity The Binatone Spirit 410 phone complies with the essential protective requirements and objectives of: EC R&TTE Directive 1999/5/EC EC Low Voltage Directive 2006/95/EC...
  • Page 18: Connection And Conditions For Use

    4 - otherwise, one or more of them may not ring and/or answer calls correctly. The Spirit 410 phone has a REN of 1, and most other telephones have a REN of 1 unless marked otherwise.

Table of Contents