Using The Reset Button - Arris Touchstone WBM760 User Manual

Getting
Safety Started
Reset
button
USB
Installation Drivers
Patterns: Startup Sequence
The following table shows the light patterns during each phase of the startup se-
quence.
Power
Off
Flash
On
On
On
Note:

Using the Reset Button

Use the Reset button, on the back of the Wideband Cable Modem, to reset the
modem as if you power cycled the unit. You may need to reset the Wideband Cable
Modem if you are having problems connecting to the Internet.
Use a pointed non-metallic object to press this button. The drawing to the left
shows the location of the Reset button.
The Reset button is recessed to prevent accidental resets.
Touchstone WBM760 Wideband Cable Modem User's Guide
Ethernet
Configuration Usage
DS US Online Link
Off Off Off Off
Flash Flash Flash Flash
Flash
Off Off Off
On Flash
Off Off
On On Flash
Off
The DS and US indicators flash yellow during startup, and turn green if
the Wideband Cable Modem establishes an ultra-high speed connection.
The Link indicator may be yellow or green, as determined by the table
on the previous page.
Troubleshooting Glossary
Description
No power to Wideband Cable Modem
Power-on Self Test
Downstream search
Downstream found; upstream search
Downstream and Upstream found;
retrieving setup information from cable
operator
47