Radio Frequency Emissions And Immunity - Arris Touchstone WBM760 User Manual

Getting
Safety Started
USB
Installation Drivers
•
•
•
•

Radio Frequency Emissions and Immunity

United States Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Product Safety
UL listed per UL60950.
Touchstone WBM760 Wideband Cable Modem User's Guide
Ethernet
Configuration Usage
If the equipment is to be installed in an area serviced by an IT power line
network, as is found in many areas of Norway, special attention should be
given that the installation is in accordance with IEC 60728-11, in particular
Annex B and Figure B.4. This product is designed for use in IT power distri-
bution systems with a phase-to-phase voltage of 230V.
In areas of high surge events or poor grounding situations and areas prone
to lightning strikes, additional surge protection may be required (i.e.
PF11VNT3 from American Power Conversion) on the AC, RF, and Ethernet
lines.
When the Wideband Cable Modem is connected to a local computer through
USB or Ethernet cables, the computer must be properly grounded to the
building/residence AC ground network. All plug-in cards within the computer
must be properly installed and grounded to the computer frame per the
manufacturer's specifications.
Do not use spray cleaners or aerosols on the Wideband Cable Modem.
Clean the Wideband Cable Modem only with a dry cloth.
Troubleshooting Glossary
4