Using Your Microwave; Setting The Clock; Before First Use - Baumatic BMM174SS User Manual

Using your microwave

Setting the clock

o When your appliance is connected to the power supply for the
first time, the LED display (A) will show 0.00 and an audible
signal will sound once.
o Press the Clock/Pre-set time button (J), the hour digits will
flash.
o Use the adjustment dial (G) to adjust the hour time.
o Press the Clock/Pre-set time button (J) to confirm the hour time.
The minute digits will flash.
o Use the adjustment dial (G) to adjust the minute time.
o Press the Clock/Pre-set time button (J) to confirm the minute
time. The ":" symbol will flash and the time of day will light on
the LED display (A).

Before first use

o To remove any residue from the oven that may have been left
from the manufacturing process, you should place a cup that is
half filled with water in the microwave.
o Set the microwave on its highest power level for 2 minutes.
o The oven cavity and outside of the appliance should be cleaned
with warm soapy water, using either a sponge or soft cloth. No
abrasive cleaners should be used. The appliance should be
thoroughly dried afterwards.
14