Built under installation requirements
IMPORTANT: NO OTHER METHODS OF BUILDING UNDER THE
MICROWAVE ARE SANCTIONED BY BAUMATIC.
o The rear wall of the housing unit MUST be removed to allow
there to be the correct amount of ventilation.
o The ventilation gaps below the support shelf and below the
worktop MUST be adhered to.
o The appropriate Baumatic Microwave Building In Kit MUST be
fitted.
o An induction hob MUST NOT be fitted above the microwave.
o It is not necessary to have a storage drawer fitted underneath
the microwave; this is shown purely as an example in the
drawing above.
28