Residual Range - BMW K 1200 GT Rider's Manual

4
50
Each time the button is pressed,
the display shows values start-
ing with the current value in the
z
following order:
Tripmeter 1 (
Trip I
Tripmeter 2 (
Trip II
Operating range (after reaching
reserve level)
Tire pressures (OE)
The total mileage is shown in the
display line.
DIST
Resetting tripmeter
Switch on ignition.
Select desired tripmeter.
Hold down button 1.
Tripmeter is reset.

Residual range

)
)
The operating range 1 is
displayed below the lettering
and indicates what
RANGE
distance can still be driven with
the remaining fuel. It is only
displayed after the fuel reserve
is reached. This distance is
calculated on the basis of fuel
level and average consumption.
When refueling, fuel is not regis-
tered until the quantity added is
approx. one gallon (several liters).
When refueling after running on
reserve, make sure that you top
up the tank to a level above re-
serve, as otherwise the sensor
will not be able to register the
new level. Otherwise neither the
fill level nor the operating range
display can be updated.
The determined residual
range is an approximate
reading. BMW Motorrad there-
fore recommends that you do
not try to use the full remaining
range before refueling.