Replacing Parking-Light - BMW K 1200 GT Rider's Manual

Install cover 1 (low beam) or
covers 2 (high beam).

Replacing parking-light

bulbs
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Right side lamp: disconnect
connector 1.
Left side lamp: disconnect
connector 2.
Remove bulb socket by turning
lever A counterclockwise.
Remove bulb 3 from bulb hold-
er.
Replace defective bulb.
8
123
z