BMW K 1200 GT Rider's Manual page 42

Tire pressure in limit area of
3
permissible tolerance
General warning light shows
40
yellow.
Tire symbol appears on the
display.
Critical air pressure flashes.
The measured tire inflation pres-
sure is in the limit area of the
permissible tolerance.
Correct tire inflation pressure in
accordance with instructions on
back of cover of Rider's Manu-
al.
z
The pressure values on the
back of the cover refer to
a tire air temperature of 68 °F
(20 °C). To also adapt the tire
inflation pressure at other tire
temperatures, proceed as follows:
Calculate the difference between
the nominal value according to
the Rider's Manual and the value
determine by the RDC system.
Change the inflation pressure in
the tire by this difference using
an air pressure tester at a filling
station.
Tire pressure outside
permissible tolerance
General warning light flash-
es red.
Tire symbol appears on the
display.
Critical air pressure flashes.
The measured tire inflation pres-
sure is outside the permissible
tolerance.
Check tire for damage and
drivability.
Is it still possible to drive with tire:
Incorrect tire inflation pres-
sure result in poorer han-
dling of the motorcycle.
Always adapt your driving style
to the incorrect tire inflation
pressure.
Correct tire inflation pressure at
next opportunity.
Have the tire checked for dam-
age by a specialized workshop,
preferably an authorized BMW
Motorrad retailer.
If you are unsure about the driv-
ability of the tire:
Do not continue driving.
Inform roadside service.
Have the tire checked for dam-
age by a specialized workshop,
preferably an authorized BMW
Motorrad retailer.
Transmission error
" " or " " is displayed.
-- -- --
The motorcycle's speed has not
exceeded the threshold of ap-
prox. 20 mph (30 km/h). The
RDC sensors do not transmit
their signal until a speed above
this threshold is reached (
Watch RDC display at higher
speed. A permanent fault has
not occurred until the general
93).