Eject, Power, And Reset Buttons; Figure 6-4. Eject, Power, And Reset Button Removal - Dell OptiPlex Gn Service Manual

E
ject, Power, and Reset Buttons
eject button
power button
reset button

Figure 6-4. Eject, Power, and Reset Button Removal

To remove the eject, power, and reset buttons, follow these steps:
1. Lay the front bezel on a flat work surface, with the back of the bezel
facing up.
2. To remove the 3.5-inch diskette-drive eject button, pull gently on the
plastic part of the button until it comes free.
3. To remove the power button or the reset button, use a small screw-
driver and push in the two or three plastic clips that hold the button to
the bezel.
When these clips are released, the button comes free from the bezel.
front bezel
Removing and Replacing Parts on the Mini Tower Chassis 6-5