Char-Broil 463261508 Product Manual page 16

Insert front brace under control panel and between cart side panels. Secure using (2) 1/4-20x1½" screws, 7mm lock
5
washers, and 7mm flat washers on each side.
NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN
ASSEMBLED TO CART.
Front brace
On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel, in
6
lower holes, using (1) 1/4-20x1½" screw, 7mm lock washer, and 7mm flat washer on each side. Do not fully tighten
screws until side shelf installation is complete in later steps.
16 • 463261508
7mm Flat Washer
7mm Lock Washer
Qty. 4
Qty. 4
7mm Flat Washer
Qty. 2
Rear upper panel
1/4-20x1-1/2"
Machine Screw
Qty. 4
7mm Lock Washer
Qty. 2
1/4-20x1-1/2"
Machine Screw
Qty. 4