Answering A Call Via The Headset - Siemens OpenScape Voice User Manual

Basic functions
Step by step
if nec.
42

Answering a call via the headset

Prerequisite: A headset is connected.
The phone is ringing. The o key flashes.
o
Press the key shown.
+-
Set the call volume.
Answering calls automatically via the headset
Prerequisite: The service personnel have additionally
configured a key with the "Auto-Headset function (AICS
Zip tone) (! page 74).
S
Press the "Auto-Headset" sensor key to activate auto-
matic call answering. This key and the headset key illu-
minate.
A short acoustic signal is heard on the headset for a call
and the connection is established.
If you want to manually answer calls again, deactivate
the automatic answering function using the "Auto-
Headset" key. Both keys are off.
Make sure your headset port is set up properly
! page 176.