Table of Contents
Advertisement
SDM-309B Satellite Modem
4.3.8 Descramble Enable (ON/OFF)
Command:
Response:
Status Only:
Response:
4.3.9 Interface Substitute Pattern (Transmit 2047 Pattern)
Command:
Response:
Status Only:
Response:
4.3.10 Interface Read Error Select (FRAME/2047)
This command is used to select the reading of frame error data or 2047 pattern error data.
Command:
Response:
Status Only:
Response:
4.3.11 Interface Buffer Center
This command centers the interface buffer.
Command:
Response:
4.3.12 Interface Buffer Size
Command:
Response:
Status Only:
Response:
MN/U-SDM309B Rev. #
<add/DE_xxx"cr"
>add/DE_xxx"cr""lf"]
<add/DE_"cr"
>add/DE_xxx"cr""lf"]
<add/ISP_xxx"cr"
>add/ISP_xxx"cr""lf"]
<add/ISP_"cr"
>add/ISP_xxx"cr""lf"]
<add/IRE_xxxx"cr"
>add/IRE_xxxx"cr""lf"]
<add/IRE_"cr"
>add/IRE_xxxx"cr""lf"]
<add/IBC_"cr"
>add/IBC_"cr""lf"]
<add/IBS_nn"cr"
>add/IBS_nn"cr""lf"]
nn = 1, 2, 4, 8, 16, or 32 (buffer size in milli-seconds).
nn = 7.5, 15, or 30 (buffer size in milli-seconds) for E1CAS_format.
nn = 6, 12, 24, or 30 (buffer size in milli-seconds) for T1IBS_format.
<add/IBS_"cr"
>add/IBS_nn"cr""lf"]
(xxx = ON or OFF)
(xxx = ON or OFF)
(xxxx = FRM (FRAME) or 2047)
Remote Control
B-B–11
Advertisement
Table of Contents
