Hydraulic System; Routine Maintenance - MULTIQUIP Diamond Back SP303516 Street Pro Operation And Parts Manual

Hydraulic System

The hydraulic system consists of:
Spindle Assembly (1)
Transaxle Assembly (9)
Lift Cylinder (5)
Hydraulic Drive and Spindle Oil Reservoir (7)

Routine Maintenance

 Check oil level daily.
 Fill the reservoir to the fill line when cold.
 Level frame prior to service to get an accurate reading.
 Use 5W-30 premium grade engine oil.
 Change transaxle oil and filter every 250 hours of operation or annually.
 Change Spindle oil every 250 hours of operation or annually.
1
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 55
3
4
Fig. 42 — Hydraulic System Components
MQ SP-3035 CONCRETE SAW
Hydraulic Pump (2)
Hydraulic Manifold (4)
Oil Filters (3, 6)
Lift Cylinder Reservoir (8)
5
2
8
7
6
9